Pipe Supports

Construction Features

• Strengthened lock bolts for high load capacity
• Can be used for both horizontal and vertical installations.
• Rubber lining for suppression of sound and vibrations.
• Lock bolts with combi cross recessed head.
• M6 side screws with PE captive disc.
• Grooved Construction for added strength.     

Technical Data

Welded Nut M8/M10 with option of M10/M12 
Safe and Break Loads as per Chart 
M6 Side Nuts can be provided on request 
Electrogalvanized as per ASTM B 633 Standards

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Strengthened lock bolts for high load capacity Can be used for both horizontal and vertical installations.
• Lock bolts with combi cross recessed head.
• M6 side screws with PE captive disc.

Technical Data

Welded Nut M8/M10 with option of M10/M12 
Safe and Break Loads as per Chart 
M6 Side Nuts can be provided on request. 
Electrogalvanized as per ASTM B 633 Standards

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• One piece clip guarantees a high permissible load.
• Mounting without any tools
• Locking device allows easy premounting
• Adjustable in height.

Technical Data

For use in Fire Fighting and Sprinkler Applications. 
Designed to meet MSS-SP58, type -10 
Electrogalvanized as per ASTM B 633 Standards

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Designed for chilled water pipework and fire fighting systems.
• Design permits vertical adjustment of pipe after installation.
• Hanger load nut above Clevis must be tightened securely to ensure proper hanger performance.

Technical Data

Material: Carbon Steel
Designed to meet MSS-SP58, type -1
Electrogalvanized as per ASTM B 633 Standards

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Designed for Chilled Water Pipework and
  Fire Fighting Systems.
• Design permits vertical adjustment of pipe
  after installation.
• Hanger load nut above Clevis must be
  tightened securely to ensure proper
  hanger performance.
• EPDM Lining for suppression of sound and vibrations.

Technical Data

Material : Carbon Steel
Electro galvanized as per ASTM B 633 Standards

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Used to mount plain or insulated pipes.
• Can be used with Rubber Support Inserts.

Technical Data

Material: Mild Steel
Electrogalvanized as per ASTM B 633 Standards

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Used to mount plain or insulated pipes
• Rubber Lining for Noise Suppression Installations

Technical Data

Material : Mild Steel
Electrogalvanized as per ASTM B 633 Standards

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• High Load Capacity due to one piece design.
• Supplied with two or four Nuts.
• Special U Bolts with longer tangents and threads can be furnished on request.

Technical Data

• Mild Steel
• Designed to meet MSS SP-58-2002, Type 24
• Electrogalvanized as per ASTM B 633 Standards

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Carbon steel
• Steel Roll Rod
• Continuous thread rods and hex nuts

Technical Data

• For support of pipe where horizontal movement due to expansion and contraction will occur.
• Vertical adjustment of up to six inches is possible
• Designed to meet MSS-SP-58-2002, Type 43 & BS 3974:Part 1 (1974)
• Hot dip galvanized

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Carbon Steel Threaded Rods
• Hexagonal Nuts

Technical Data

• For support of pipe where horizontal movement due to expansion and contraction may occur.
• Vertical Adjustment upto six inches is possible
• Designed to meet MSS-SP-58 2002, Type 44 & BS 3974:Part 1 (1974).
• Hot dip galvanized

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Malleable Cast Iron
• Zinc Plated Casting tolerance according to DIN 1684 GTA/17
• hexagon Threaded Head Screw DIN933 8.8
• Threaded and with Cup Point (RS) according to EN ISO 4753 and lock nut

Technical Data

• For Sprinkler systems, heating, ventilation and air conditioning, acoustic tubes and sanitary installations.

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Designed for fixing pipes away from Wall
  or floor
  Suitable for risers.
  Rubber Lining for Noise Suppression

Technical Data

• Mild Steel 
  Electro galvanized as per ASTM B 633 Standards.

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Designed to act as a Rigid Support or Guide for Vertical Pipes
• Suitable for use with all types of pipes.

Technical Data

Material: Carbon Steel
Designed to meet MSS-SP58 - 2002 - Type 8
Electro galvanized as per ASTM B 633 Standards.

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Construction Features

• Designed to act as a Rigid Support or Guide for Vertical Pipes
• Suitable for use with all types of pipes.
• With EPDM Lining for Suppression of Sound and Vibrations.

Technical Data

Material : Carbon Steel 
Electrogalvanized as per ASTM B 633 Standards

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Designed to be used in installation where pipe movement is possible.

Consists of two main components, one is attached to the pipe line, fabricated from channel section, and the other component consists of a base member on which the clamp attached to the pipe rests and slides. 

Clamp can be fabricated to suit diameters of insulated pipes. 
Can be used for horizontal and vertical installation.
Designed to meet BS 3974-1:1974, MSS SP 58 TYPE 35. 

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Designed to be used in installation where pipe movement is possible.

Consists of two main components, one is attached to the pipe line, fabricated from channel section, and the other component consists of a base member on which the clamp attached to the pipe rests and slides.

Clamp can be fabricated to suit diameters of insulated pipes. 
Can be used for horizontal and vertical installation 
Designed to meet BS 3974-1:1974,MSS SP58 TYPE 35
  

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Finish: zinc plated

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Finish: zinc plated

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces

Finish: zinc plated

Used for parallel piping mounted on channels. Quick installation design.
Electrogalvanized as per ASTM B 633 Standards 

Other Information

• Minimum Order Quantity: 5000 Piece/Pieces